|
1 Martin Hurni Synthophone, Selmer Super Action 80 with redesigned power supply
3 Yamaha VL70-m Physical Modeling Tone Module ( with the Patchman VL Turbochip)
1 TOA D3 mixer
1 Galaxy HotSpot Monitor
1 Furman AR-117 line Conditioner
1 Woodwind Brasswind ProTenor Saxophone with a Jody Jazz Gold Mouthpiece
2 Mackie SLM350 Powered Speaker
1 DMC Ground Control Pro Midi Foot Controller
1 Yamaha FC9 Volume pedal
1 Midi Solutions Quadra Midi merge
Kenton Wireless Midi (transmitter mounted in the Synthophone Power Supply minus the AC circuit
Presonus Comp16 Compressor
| Martin Hurni Selmer Super Action 80 Synthophone |
|
| click to supersize |
This is the latest rig as of 3-15-08. I split everything up into 2 rack cases. The main Rack is a Rok Sak 4 space. It
is plywood covered in nylon. It is durable yet light and easy to carry. Here I have 3 VL70m's with Turbo Chips, a TOA D3 Mixer,
the new Synthophone Power Supply, and a Quadra Merge. In the Gator 3 space rack Bag there is the Kenton wireless Midi Receiver
and the Furman Power Conditioner/ Voltage Regulator.
| Rig rack 1 3-15-08 |
|
| Click to enlarge |
| Rack Back |
|
| click to enlarge |
| New Synthophone Power Supply |
|
| click to enlarge |
Rig as of 9-23-06. Simplicity makes for less weight, less connections to come undone, and it is easier to make clean
layering of the synths.
| click to enlarge |
|
Here are a couple of my previous rigs
| click to enlarge |
|
This was the rig that is in a 4 space effects rack prior to dropping another VL70-m in favor simplicity . It was a bit
of a task getting everything to fit but all of the components and wiring are very snug and secure. The Bose PAS allowed for
a reduction in components.(( update 5-29-07)) I have returned to basically this same setup. Two VL's are real nice for layering
sounds. Eventually I will have 3 back in my rig. The horn section sounds and other layers are pristine , and very authentic
sounding. I would have to sacrifice only a few sounds in the XV to go this way again.
| click to enlarge |
|
(Left side view)
Below is a view of the actual wiring. Everything is secured with wire ties ,and velcro.
Note the Antenna mounts. For both the Sennheiser Wireless In Ear Monitor , and the Kenton. I have installed
antenna extensions to allow rack mounting. This is the old rig before it was modified and downsized.
| click to enlarge |
|
|
